Quote Originally Posted by djooeis View Post
What exactly do you want to improve? The pillars are small and PETG is stingy stuff. I can not really see the sides of the pillars that clearly.. The top of the part looks to be under extruded, there should not be able to see the threads below when looking through the cracks between threads.
I'm already improved it by changing my retraction to 1 from 3. Theres still a hair of stringing by its easily cut with a blade. I think my problem was when it switched from the leg with the holes over to the pillar it was way under extruding becuz of the retraction. I havent tried printing much anything else since i've been printing the hell of these brackets as I sell them so i wanted to print a whole bunch while I got it printing good before i adjust anything