Results 1 to 1 of 1
-
08-19-2019, 07:58 AM #1
- Join Date
- Aug 2019
- Posts
- 4
Pla+ under extrusion after retraction
Hello
I have a problem with printing with PLA+
i have a lot of under extrusion and it looks like that mostly/all happens when retraction is used.
and with a lot of retraction hapening a lot of under extrusion.
i tried a lot of solutions i found on the net but nothing helped so far.
See the pictures to see what i mean
hope someone can help im desperate
Printer: ultimaker2 ext+ With TinkerGnome
firmware.Filament: eSun Pla+ Black 2.85mmLast edited by Rene88; 08-19-2019 at 09:02 AM.
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery