Results 1 to 3 of 3
Hybrid View
-
08-11-2019, 06:51 AM #1
In order to change the extruder from its current extrusion of 150mm to 100 it has to be reduced by 1.3 or 50mm
multiplying by 2/3rds or .666 gives us 400 + .6666 = 266.664
#define DEFAULT_AXIS_STEPS_PER_UNIT {80, 80, 400, 266.664}
after changing the settings you need to read the values from firmware.
M502
and Save them to memory as the new defaults.
M500
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials