Quote Originally Posted by curious aardvark View Post
that is a weird one.

I'd have gone for the sd card - but if you've re-formatted it and tried a different one - not that.

The other obvious one would be the motherboard overheating - but doubtful it'd happen on 2 boards.

Check the cards are formatted with fat32 and NOT exfat.
Could still be that.
Thanks for the suggestion. I went ahead and gave it a try and reformatted an 8GB SD Card as a FAT32 (it was before). I then re-attempted the print and got the same issue.

I had read about a similar issue on other printers where thye would freeze like this and some users had determined the problem was due to the board getting insufficient voltage and browning out. I double checked the voltage output from the power supply and unfortunately it's rock solid at 24V which is what the board is expecting.