Results 1 to 6 of 6
Thread: Qidi Tech 1 Freezes Mid Print
Hybrid View
-
07-21-2019, 09:41 AM #1
- Join Date
- Jul 2019
- Posts
- 3
Thanks for the suggestion. I went ahead and gave it a try and reformatted an 8GB SD Card as a FAT32 (it was before). I then re-attempted the print and got the same issue.
I had read about a similar issue on other printers where thye would freeze like this and some users had determined the problem was due to the board getting insufficient voltage and browning out. I double checked the voltage output from the power supply and unfortunately it's rock solid at 24V which is what the board is expecting.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials