Results 1 to 5 of 5
Threaded View
-
07-11-2019, 10:02 PM #4
- Join Date
- Oct 2018
- Posts
- 8
Ive checked the extruder and it is not loose.
I swapped back the original nozzle and have the same effect.
I have re calibrated the axis on the machine and re set the Z height to 0.2mm
Also tried rotating the the print 45deg
What I have noticed is that I need to back the Flow off to 70% on the first layer. Originally I would sometimes back it off to 90% (table changes after heat cycles and can be high on one side)
I would like to run through developing print parameters (mainly flowrate)
Do you have a good procedure or file to use to help develop?
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials