Close



Results 1 to 7 of 7
  1. #1

    Need help with printing quality

    Hi everyone! I am having this imperfections in my prints and im not sure what it is, ive been trying to solve it for quite a while now and i have not been succesful. I would appreciate the help. Thanks!

    I am printing at 210 ?C, 40 mm/s printing speed, outer wall 20 mm/s, retraction enabled, 0.2 mm quality.
    IMG-5890.jpg
    Attached Images Attached Images

  2. #2
    Engineer Roberts_Clif's Avatar
    Join Date
    Jun 2017
    Location
    Washington State, USA
    Posts
    577
    Add Roberts_Clif on Thingiverse
    It appears it could under-extruded

    What material are you trying to 3D Print.

  3. #3
    Pla 1.75 mm

  4. #4
    Engineer Roberts_Clif's Avatar
    Join Date
    Jun 2017
    Location
    Washington State, USA
    Posts
    577
    Add Roberts_Clif on Thingiverse
    Do you have an all metal hot-end or do you have a Teflon tube in the throat.

    If you have a Teflon tube you may want to disassemble the hot-end to see if the Teflon tube has deformed.

  5. #5
    its all metal, but if its not a software calibration or firmware issue i would guess theres something wrong with the extuder

  6. #6
    Engineer Roberts_Clif's Avatar
    Join Date
    Jun 2017
    Location
    Washington State, USA
    Posts
    577
    Add Roberts_Clif on Thingiverse
    I have very little to go on, you have provide the forum with only of a photo showing under-extrusion.
    Then Stated "PLA 1.75mm"

    If you would provide more information, it could make it much easier to help you solve the problem.

    Is it a new build , what 3D Printer, What firmware are you using , was it factory flashed or do you have the Configuration files.

  7. #7
    Student
    Join Date
    May 2019
    Location
    WA
    Posts
    4
    Add Rich3d on Facebook
    I would defiantly lean towards an extruder/extrusion issue as well.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •