Results 1 to 7 of 7
Thread: Need help with printing quality
Hybrid View
-
06-11-2019, 07:56 PM #1
Do you have an all metal hot-end or do you have a Teflon tube in the throat.
If you have a Teflon tube you may want to disassemble the hot-end to see if the Teflon tube has deformed.
-
06-11-2019, 08:06 PM #2
- Join Date
- Jul 2017
- Posts
- 5
its all metal, but if its not a software calibration or firmware issue i would guess theres something wrong with the extuder
Please explain to me how to...
Today, 02:43 PM in 3D Printer Parts, Filament & Materials