Results 1 to 7 of 7
Thread: Need help with printing quality
Hybrid View
-
06-11-2019, 05:33 PM #1
It appears it could under-extruded
What material are you trying to 3D Print.
-
06-11-2019, 05:40 PM #2
- Join Date
- Jul 2017
- Posts
- 5
Pla 1.75 mm
-
06-11-2019, 07:56 PM #3
Do you have an all metal hot-end or do you have a Teflon tube in the throat.
If you have a Teflon tube you may want to disassemble the hot-end to see if the Teflon tube has deformed.
-
06-11-2019, 08:06 PM #4
- Join Date
- Jul 2017
- Posts
- 5
its all metal, but if its not a software calibration or firmware issue i would guess theres something wrong with the extuder
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help