1st ABS Failed Print

[TommyDee]

On my printers, which are fairly accurate on temps, I get ~250C on 3rd party ABS. And I get away with having no heated bed (thermal chamber on one; exposed to ambient on the others).

[Roberts_Clif]

On my printers, which are fairly accurate on temps, I get ~250C on 3rd party ABS. And I get away with having no heated bed (thermal chamber on one; exposed to ambient on the others).

Exactly!

This is what I am saying I can not tell you why it prints so well with a Nozzle temp of 228C an the Hotbed temp of 96C.
Other than it is working inside an enclosure the heat inside merely surrounds the parts an everything just works for me.