Results 1 to 2 of 2
-
08-10-2019, 03:26 AM #1
- Join Date
- Aug 2019
- Posts
- 10
First print - need advice to make it perfect. pictures in post
pictures https://drive.google.com/open?id=1_0...ZzzUiPFZQ7LB0U
Good day
got my QIDI x max.
Printed the Test tower/tube that came with it and it looked nice.
Then I printed the "Test print" from thingiverse with overhangs, bridging and so on.On this print, several things didnt look so nice and I couldnt read the text.TExt is unreadable. To my eye it looks like the temp was too high?The 3 towers in the corner, the third didnt make it to full length.
They are also round and not square.
Q: whats causing this? Too high temp? too high speed? Nozzle too close to bed?
Then some pictures I took from an ongoing print right now. PRinting with a cubic support. There are some strings here and there. Same print settings.would love some feedback on whats causing this
thanks
regards
settings: PLA
Temp: 190?C, Bed 50?C
Speed 60mm/s
0.2 layer height
-
03-26-2020, 08:30 AM #2
there are about a million videos on youtube.
Start there :-)
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery