heating issue

[TommyDee]

Measure the output of the power supply with a VOM. If it is no longer regulating to its intended voltage, you are drawing more power than it will provide.
If the power supply remains in regulation, meaning it maintains the appropriate output voltage with everything cranked up, you have a different problem.

[cripto101]

Measure the output of the power supply with a VOM. If it is no longer regulating to its intended voltage, you are drawing more power than it will provide.
If the power supply remains in regulation, meaning it maintains the appropriate output voltage with everything cranked up, you have a different problem.

Thank you for the response TommyDee. I did check it both with the bed heated to temp and the hot end heating up and with just the hot end heating up. It maintained a stable voltage. It is currently set to 13 volts. I also checked it under multiple different situations trying to see if anything changed but nothing.