Flashforge Finder - how thin can you print?

[Moab Man]

targeted test prints are great for characterizing particular printers.

Thanks for the reply. I'm going to do some test prints on the Finder and use my caliper to see.

[Moab Man]

Thanks for the reply. I'm going to do some test prints on the Finder and use my caliper to see.

Did a print test: 1mm, 0.5mm, 0.4mm, 0.3mm, and 0.2mm. The Flashforge Finder will print as thin as 0.4mm. Any smaller of a specification still prints at 0.4mm.