Results 1 to 7 of 7
Hybrid View
-
04-05-2019, 12:39 PM #1
- Join Date
- Apr 2019
- Posts
- 4
It was a single trace. I had to first make a bed. Trying to print directly on the bed wouldn't take below 0.5 with any consistency. Not sure what the layer thickness was. It was the default for Flashprint slicer. Printer is running at the moment. When it's done I will take a look at what the default settings were.
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help