Results 1 to 3 of 3
Thread: Tip for magigoo users
Threaded View
-
03-27-2019, 06:55 AM #1
Tip for magigoo users
Don't Squeeze too hard !
Tried it last night, in an attempt to find something petg will stick to reliably.
Now the thing is that magigoo is REALLY thick. It's not misnamed - it's proper, gelatinous goo !
And when you take the lid off the tube and give it a squeeze - the little spreading sponge - stays dry.
So you squeeze it a bit harder.
Nothing happens.
So you up the squeeze..
Eventually the entire top of the tube blasts off and you get covered in thick gloop !
However, it's that thick that if you turn the tube the right way up fast enough, about 3/4 remains in the tube.
The rest is all over your jeans, floor and hands :-)
On top of that, turns out pet-g doesn't stick to it anyway.
So don't squeeze hard, have patience and eventually it will trickle into the sponge :-)
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials