Results 1 to 10 of 13
Thread: Amazing Resolution
Hybrid View
-
06-24-2014, 07:18 PM #1
- Join Date
- May 2014
- Location
- San Francisco
- Posts
- 31
Titan 1 is the fastest personal SLA printer in the market today. For other SLA printers to print a 4.6 inch Eiffel tower with 100 micron Z resolution, it takes anywhere from 4 to 6 hours. With Titan 1, it only takes 2 hours.
Titan 1's maximum speed for xy:50μm and z:100μm resolution is about 2.7 inches / hr and 1.3 inches / hr for xyz:100μm resolution. Compared with FDM type 3D printers, Titan 1 is five times faster and has much better resolution and surface smoothness.
Thanks!
-
12-06-2014, 01:57 PM #2
-
12-13-2014, 02:11 PM #3
- Join Date
- May 2014
- Location
- San Francisco
- Posts
- 31
@ Bryan - Yes you are right. As the build area is getting larger, the light intensity is getting weaker on the resin container.
Longer exposure time is needed to get enough dosage of photons for solidification.
This slows down the printing speed. Z layer thickness also has impact on the exposure time.
-
12-13-2014, 03:07 PM #4
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials