Results 1 to 10 of 11
Hybrid View
-
03-17-2019, 10:05 PM #1
- Join Date
- May 2018
- Posts
- 564
No I was referring to the area between the hub and the outside.. If you are going to create a 3d model to print and it could be solid in that area it is easier to print.
-
03-18-2019, 12:03 AM #2
- Join Date
- Oct 2014
- Posts
- 47
The underside of that pulley is solid; so I gather the side you are seeing can be solid too!
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials