Results 1 to 10 of 10
Hybrid View
-
03-14-2019, 10:59 AM #1
hang on while I engage my psychic powers.............
Nope not working today, so you'll have to give us some actual information :-)
start with:
printer, filament type, printing settings: temperatures speeds, slicer etc.
I'd say you're printing too fast and at too low a temperature. But without any information whatsoever, that's just a wild guess. :-)
-
03-14-2019, 12:33 PM #2
- Join Date
- Dec 2018
- Location
- Sweden
- Posts
- 22
printer: Ender 3
filament type: PLA,
printing settings:
temperatures: 220
speeds:
- Print speed 60
- infill speed 80
- wall speed 30
- inner wall speed 30
- top/bottom speed 15
- Inital layer speed 10
slicer: Cura
I attached the proflie.
Hope this is enough.
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials