Results 1 to 10 of 32
Thread: 3d printing at home setup
Threaded View
-
03-23-2019, 12:58 PM #13
until the hotend jammed I was using the mini quite alot for small detailed items. Currently waiting on the time and inclination to take it to bits and fix it.
If you're going to get a dual extruder - and they really aren't s useful as you think - then save up and go for an idex system. Independant Dual Extruders.
Takes much of the hassle out of it.
That said I do use my klic-n-print very occasionally for a dual, print. But mostly for having both normal pla and flexible pla available without having to change spools over.
I have used it for dual colour flexibles, but if i was buying a dual extruder system today - it'd be idex or nothing.
Never did dual prints on my old flashforge creator. Ended up ttoally removing the right extruder and replacing with plastic model of motor - otherwise the endstop didn't get pressed :-)
Now this looks interesting: https://www.thingiverse.com/thing:3297964Last edited by curious aardvark; 03-23-2019 at 01:13 PM.
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials