Results 1 to 10 of 35
Thread: FLSUN Printer Issue
Hybrid View
-
03-06-2019, 05:00 PM #1
- Join Date
- Mar 2019
- Posts
- 21
Yor are definitely correct!! I looked and all labeled just like yours. I went by all the pictures in the assembly process. They must have the camera flipped or a reverse image or something. How should the wiring be? Complete opposite of what I have then??
-
03-06-2019, 07:37 PM #2
Mirror image the Wires
Red, Black, Brown Blue
I use a Spare Computer Power Cord because it has 3 Wires,
If you look at the first photo you can see the Colored Marker labels
Brown = L
Blue = N
Green = Ground symbol
This must have been totally scary when the sparks flew.
This should not have burned up the Supply, but if it did should be under warranty.Last edited by Roberts_Clif; 03-06-2019 at 07:58 PM.
-
03-07-2019, 05:52 PM #3
- Join Date
- Mar 2019
- Posts
- 21
-
03-07-2019, 06:43 PM #4
Red to Plus
Black to minus
Brown to line
Blue to neutral
Power switch to 120Vac
This look correct.
-
03-07-2019, 07:09 PM #5
- Join Date
- Mar 2019
- Posts
- 21
Well that didn?t work either. It still sparked and popped at the outlet
-
03-08-2019, 06:15 AM #6
Where are you? Do not be exact Country is enough.
The power supply could have been destroyed, by incorrect wiring get a replacement under warranty.
-
03-08-2019, 06:23 AM #7
- Join Date
- Mar 2019
- Posts
- 21
I?m in the U.S.
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials