Results 1 to 2 of 2
  1. #1

    CTC SLA Riverside To Formlabs Conversion

    Hi! As you may know CTC SLA Riverside printer is fully hardware clone of Formlabs Form1/Form1Plus SLA Printer.
    I managed to launch this printer on the original firmware from Formlabs.
    And now CTC SLA Riverside 3D printer is fully usable with Formlabs PreForm software.
    If you want to try to flash Formlabs firmware to your printer you can find all information by googling "CTC Riverside hack"

    WARNING! After you flash it is not possible to get back to CTC firmware. You are doing it on your own risk!
    Last edited by ostapf; 03-02-2019 at 03:54 AM.

  2. #2
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    does it make a noticeable difference using the preform software ?

    Is it quicker, are the prints better ?
    ie: is it worth the update ?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts