Results 1 to 10 of 10
Hybrid View
-
02-12-2019, 08:52 AM #1
- Join Date
- Feb 2016
- Posts
- 68
Sounds like you have yours set up good. I do need to replace the wing nuts as they are very loose on the bolt.
To get my screws up tight I will need to lower the head just on the right side. I am not sure if just turning the worm gear will do that. I might have to go back and watch the set up videos again.
EDIT: I'll do this first and adjust the z axis.
https://www.youtube.com/watch?time_c...&v=k7lmUywqOd4Last edited by Firepower; 02-13-2019 at 01:44 AM.
Please explain to me how to...
Yesterday, 03:08 PM in 3D Printer Parts, Filament & Materials