Results 1 to 5 of 5
Thread: newby help
Hybrid View
-
01-25-2019, 02:00 PM #1
- Join Date
- May 2018
- Posts
- 565
Try slicing this 15x15x2x.6 mm square and printing it. When complete measure it with your Digital caliper (you really need one if you want to do 3d printing) It should be 2mm tall within .02mm+- and have a wall thickness of .6 +-.02.If it is too tall you nozzle starting height is too high and you will have adhesion issues. If the walls are too thin you are under extruding. Obviously the inverse of either is bad as well.Hope that helps
Please explain to me how to...
Today, 07:24 AM in 3D Printer Parts, Filament & Materials