Results 1 to 7 of 7
Threaded View
-
01-19-2019, 08:43 AM #2
you need to make sure that you have '0 top layers set in the slicer.
There are settings for top and bottom layers and side walls.
Usually set somewhere between 1-3.
you need to make sure that you have '0 top layers set in the slicer.
There are settings for top and bottom layers and side walls.
Usually set somewhere between 1-3.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help