Results 1 to 4 of 4
Thread: Max height problem with printer
Threaded View
-
01-18-2019, 02:17 PM #3
- Join Date
- Jan 2019
- Posts
- 8
it is at the bottom. When home is hit , the build table pulls all the way back and the extruder almost touches the left front corner of the plate. The z switch is made when this happens. I have 2 3/4" from the plate to the tip of the extruder max up. Control panel shows z:255.00 at this point and z:0.00 at the home and bottom position. Conversion chart shows 255mm is 10.03 inches.
Last edited by adam120674; 01-18-2019 at 02:20 PM. Reason: spelling
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials