Results 1 to 7 of 7
Threaded View
-
12-29-2018, 12:05 PM #1
- Join Date
- Dec 2018
- Posts
- 1
Ender 3 Nozzle Won't Reach the Bed
Hello everyone,
First post here - just bought my first 3D printer, the Creality Ender 3, and having assembled it late last night, I ran into my first issue before ever getting to print with it. The bed seems to be too low and not reach the nozzle, no matter what I do, so I am unable to even level the bed (as shown by first photo). The problem is that the Z-limit (in the second photo) is in it's very bottom position and cannot go lower. Also the springs are fully released so I am unable to raise the bed further.
I am guessing the solution is simple but I cannot find it after searching the forums for an hour or so. I followed all the assembly steps carefully (way easier than some IKEA furniture I've done...)
Any help would be appreciated.
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help