Close



Results 1 to 3 of 3
  1. #1

    Thinning out a scan

    Hey all. First post, thank you for having me, and happy holidays.

    I took a scan of a bowl shaped object, inside and out. However, to reproduce this, what I'd like to do is print out a thinner version of this and reinforce the inside with fiberglass. What I'm thinking is, I should not have scanned the inside AND the outside, and just scanned one side. Then, I assume there's a method to automatically generate an "other side" of the model with a custom thickness based on the side that you DID scan. Is that the correct method of thinking? If so, where would I look to learn that? I currently have Mesh Mixer and 3d Simplify at my disposal. Thanks in advance!

  2. #2
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,801
    can't you use the scanning software ?

  3. #3
    Maybe not. The software will not be useful.9AppsLucky Patcher
    Last edited by 7YADER; 06-12-2019 at 02:26 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •