Results 1 to 10 of 41
Hybrid View
-
02-13-2019, 12:55 PM #1
- Join Date
- Dec 2018
- Location
- Sweden
- Posts
- 22
Well here it is, looks like 205C and higher gave good results.
20190213_194719.jpg20190213_194851.jpg
-
02-13-2019, 06:40 PM #2
Excellent!!!
Any other Questions.
-
02-14-2019, 09:22 AM #3
- Join Date
- Dec 2018
- Location
- Sweden
- Posts
- 22
Well i tried to print a tension fix twise (https://www.thingiverse.com/thing:3066664) but it came out like this.
20190214_161437.jpg
What am i doing wrong the heat tower went well. Why won't these.
-
02-16-2019, 09:40 AM #4
- Join Date
- Feb 2019
- Posts
- 2
Wat temp was this printed at? Based on your heat tower, 215-220 seems to be your sweet spot (maybe a tad higher) - at least for that filament. Have you tried a different roll of filament? I print some PLA filament at 215 and some as high as 230 on my Ender 3, depending on brand. The last pic you posted looks like a cold print to me. Is the nozzle hitting the print?
-
02-16-2019, 01:01 PM #5
-
02-19-2019, 12:36 PM #6
- Join Date
- Dec 2018
- Location
- Sweden
- Posts
- 22
After i changed my temperature to 225C (Thanks BigDenver for pointing that out).
My prints became like this.
20190219_030711.jpg20190219_030732.jpg20190219_191826.jpg
How come different temperatures are needed for different filament, when the temperature for the filament is on the spool?
However THANK YOU SO MUCH Roberts_clif for sticking around and helping me .
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help