Results 1 to 10 of 26
Hybrid View
-
01-09-2019, 01:24 PM #1
- Join Date
- Dec 2018
- Posts
- 17
Now my problem is(I think) that my nozzle is too high(pictures above) . I'm having trouble setting the hight of the autoleveling probe relative to the nozzle. My first tries adjusting the probe made my hotend dig into my printing surface. When I lower the probe it becomes lower than my hotend, it then sweeps up whatever I'm printing.
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help