Results 1 to 2 of 2
Threaded View
-
06-01-2014, 11:19 PM #2
- Join Date
- May 2014
- Location
- San Francisco
- Posts
- 31
We do not have any infills in our models after hollowing. To enhance the strength of printed model, you can print some supports inside.
For the honeycomb type of infill, we are not aware of any software to generate such an infill structure. To open holes at the bottom of the model, we usually use blender. Thanks!
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials