Results 11 to 20 of 38
Thread: Surface Smoothness
Hybrid View
-
06-01-2014, 09:35 AM #1
- Join Date
- May 2014
- Location
- Albany NY, USA
- Posts
- 14
-
06-01-2014, 12:10 PM #2
- Join Date
- May 2014
- Location
- San Francisco
- Posts
- 31
Hugues and Kenzie - you are both correct. Any paint or coating will smooth out the surface but will come at the expense of resolution. The thicker the paint, the more resolution will be lost.
Kenzie - thanks for the offer for the design!
https://grabcad.com/library/graduation-ring
We are going to contact the designer for permission. Would this ring work for you guys? Please let us know.
Thanks everyone!
-
06-01-2014, 12:41 PM #3
- Join Date
- May 2014
- Posts
- 6
-
06-04-2014, 09:00 PM #4
- Join Date
- Jun 2014
- Posts
- 5
The 25 micron ring looks great. Can you share the amount of pigment that you added to the resin for this resolution (what layer thickness too). Also, approximately how long did you cure the resin?
Thanks
-
06-07-2014, 02:02 AM #5
- Join Date
- May 2014
- Location
- San Francisco
- Posts
- 31
-
06-01-2014, 11:53 PM #6
- Join Date
- May 2014
- Location
- San Francisco
- Posts
- 31
Thanks everyone for the help, especially JDK3D for the design! We actually got permission from the designer of the graduation ring (https://grabcad.com/library/graduation-ring).
We will get this printed asap and will update to see your feedback.
JDK3D - if you still don't mind, we would love to send over Kudo3D's logo for you to incorporate in the design. We can print it after the design is ready. Thanks so much and I'll message you through Kickstarter!
-
06-03-2014, 05:23 AM #7
- Join Date
- Jun 2014
- Posts
- 3
Hi jon@kudo3D. I am interested in your printer for jewelry as well. I can email you 2-3 "generic" files to test print. I will try and email you now.
Regards,
Rik
-
06-03-2014, 05:43 AM #8
- Join Date
- Jun 2014
- Posts
- 3
3 x STL rings to test print on the Titan1
Hi Jon. I tried email you but obviously have the wrong email address. I have been training in CAD for Jewelry design for over 9-years. Used many 3D printers in that time from $65k+ down to $5k. I would be interested in you trying some sample ring designs. They are my own which I use for training purposes, so you are free to test print, photograph and use them how you see fit. If you can advise an email address I will email you a zip file containing 3 x STL's to test print.
Regards, Rikj
-
06-03-2014, 12:16 PM #9
- Join Date
- May 2014
- Location
- San Francisco
- Posts
- 31
Hi Rikj,
Thanks for your message - please email jonathancheung@kudo3d.com. We will try our best to get to them!
-
06-04-2014, 06:16 PM #10
- Join Date
- Jun 2014
- Posts
- 3
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials