Same technology as Form 1?

[Feign]

The Form 1 uses a laser and an actuated mirror to project an image onto the resin, while the Titan 1 uses a modified DLP projector to project the image.

Both styles have their advantages and drawbacks which have been discussed at length on these forums.

[jon@kudo3D]

There are a few key differences:

1) Titan 1 is equipped with an unique patent-pending layer release technology based on a flexible VAT. This technology minimizes the release force and enables large area printing that Form1 cannot achieve. These minions below was using 192mm x 108mm printing. Titan 1's speed is faster, and the machine is simpler.

minions.jpg

2) Form 1’s laser spot size is 300 microns which does not provide enough resolution for printing fine jewelry. Titan 1's laser spot size is between 37 to 100 microns.

Titan 1 can print everything that Form 1 can print, but Form 1 is not able to print objects that are beyond Titan 1's print size range (bigger or smaller objects).