Ethernet Cables

[Roxy]

Here is the source file and the .STL file for the RJ-45 Jack mounts. There is some problem where the jack looks solid on the parts laying down. I'll have to take a look at that. If you are going to print these parts, let me know and I'll hurry up and fix what ever the problem is. Otherwise... I'll get to it when ever.

Assuming you have some Prusa variant... It shouldn't be too hard to take the RJ-45 Jack code and paste it onto the right spot on your plastic parts and do something similar to what I did.

I put the various parts all in one file. You can see the single RJ-45 jack usage and the double jack usage. On my Z-Axis, one jack has plenty of wires. On my extruder I have LED's lighting up the end of the nozzle so I can see stuff better and one Jack isn't enough with the bed leveling stuff on the there.

Update: The parts look fine in the .STL file. It must be an Open_SCAD rendering problem.