Looks like a new kickstarter project has just launched. This one is for a kit to build the Makrtoolbox Mk1 3D Printer. The Kickstarter project for the Mk1 can be found here: https://www.kickstarter.com/projects...er?ref=kickspy
Details about the device can be found at the 3DPrint.com article here: http://3dprint.com/4480/makrtoolbox-mk1-3d-printer/

The General specs for the Mk1 are as follows:
  • Build Volume: 6"x6"x6" (150mmx150mmx150mm)
  • Resolution: <50 microns (0.05mm) X/Y & 100 microns (0.1mm) Z
  • Nozzle Size: 0.3mm or 0.4mm
  • Hot End: J-Head ( easily replaceable, upgradeable)
  • Filament Diameter: 1.75mm
  • Materials: Tested with PLA and Nylon
  • Power: Includes 110v Power adapter. 12v 6amp
  • Controller: Ramps 1.4 board (Arduino based)
  • Software: G-Code compatible (Using Marlin Firmware) / Free Open
  • Source programs like Repetier Host or Pronterface


Here is a picture of the device: