Results 1 to 6 of 6
Thread: Creator X led screen error?
-
05-23-2014, 05:09 PM #1
- Join Date
- May 2014
- Location
- Scotland
- Posts
- 23
Creator X led screen error?
Hi again
just fixed one problem and now my 3rd. Using my Galaxy Note to upload this picture of what happened to my Creator X screen half way through a print.
No idea what to make of it. The screen is fine now but I was using the 2nd exude with glowy pla for the first time.
Any ideas guys?
Thanks
-
05-23-2014, 11:22 PM #2Hex3D - 3D Printing and Design http://www.hex3d.com
-
05-24-2014, 04:35 AM #3
- Join Date
- May 2014
- Location
- Scotland
- Posts
- 23
Sailfish FF Creator
free SRAM 797
Thing 32084 r01228
Firmware version 7.6
....It says. Should i reset the motherboard you think?
-
05-24-2014, 07:41 PM #4
wow, I'm running firmware version 1.0.... I guess they updated a fair bit since that for the X...
A factory reset will not hurt anything, might have to run a bed levelling setting and feeding extruders because it might make you go through the start up beginners script again (which can be run manually from my menu, not sure about yours)Hex3D - 3D Printing and Design http://www.hex3d.com
-
07-19-2014, 08:56 AM #5
-
05-27-2021, 08:56 AM #6
- Join Date
- Sep 2020
- Posts
- 1
unlock your Samsung phone's note 10. https://www.unlockninja.com/unlock-s...galaxy-note-10
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery