Results 1 to 9 of 9
Hybrid View
-
10-31-2013, 11:22 AM #1
I also think that you might be clogged.
To unclogged the head you must unscrew the nozzle and remove the thermistor and the heater.
this must be done after heating the head, never do it when it's cold or you may broke the head.
Then you have to put the nozzle in a bottle with some acetone (acetone will disolve the ABS) it can take 2 days or more).Last edited by Mcbride19; 10-31-2013 at 11:31 AM.
Please explain to me how to...
Today, 12:15 PM in 3D Printer Parts, Filament & Materials