Results 1 to 5 of 5
Thread: Extruder heat lagging
Threaded View
-
05-22-2014, 10:21 PM #5
Yeah, it could be Bill. I find that the hotbed really sticks well when I let it sit for a minute at high heat. If I try and print the second it hits 110c its not as adhesive.
I assume the plate is not actually 110c when it says it is, the sensor and the part of the bed above the sensor is - BUT not the rest of the plate. I have found lately over heating the bed on pre-heat and then printing 2 degrees lower is a GREAT improvement.
Set the bed to 112c for preheat, and 110c for printing - works like a dream
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials