Results 1 to 8 of 8
Thread: Ender 3 problem.
Threaded View
-
11-07-2018, 06:36 PM #1
- Join Date
- Nov 2018
- Location
- Rangiora NZ
- Posts
- 4
Ender 3 problem.
I have just finished assembling an Ender 3 printer. The extruder on the X-axis travels to the right-hand side and hammers against the stop when selecting Auto Hom. The extruder then positions at front right. I printed a fan cover and found that the ext "ender" was a mirror image which suggests that the X-axis motor is incorrectly wired. On the extruder motor and Z axis motors, the wires to the plugs are identical. That is wire 1 to plug 1, wire 2 to plug 4, wire 3 to plug 3 and wire 4 to plug 6. The X-axis motor is wired as follows: wire 1 to plug 1, wire 2 to plug 4, wire 3 to plug 3 and wire 4 to plug 3. This would appear to be wrong. One would assume all motors would use the same wiring protocol. Any suggestions gratefully appreciated. Ian
Please explain to me how to...
Yesterday, 02:43 PM in 3D Printer Parts, Filament & Materials