Subscribe to Our Newsletter Advertise
Close



Results 1 to 10 of 13

Hybrid View

  1. 10-30-2018, 06:29 PM #1
    curious aardvark
    curious aardvark is offline
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,818
    and learn the lesson: if it works - don't bugger about with it :-)

    One thing to check. Make sure the configuration.h file actually has your screen selected.
    Sounds like maybe it's choosing the wrong screen.
    Last edited by curious aardvark; 10-30-2018 at 07:28 PM.
    Reply With Quote Reply With Quote
  2. 10-31-2018, 02:13 AM #2
    Bernard
    Bernard is offline
    Student
    Join Date
    Oct 2018
    Location
    South Africa
    Posts
    7
    Haha yes, lesson learnt. And I'm not sure if there is a different way. But what I did was go into the configuration.h to the LCD controller section and enable the display most similar to mine. I have the MKS Mini. Is that the correct way to do that?
    Reply With Quote Reply With Quote
  3. 10-31-2018, 02:27 AM #3
    Bernard
    Bernard is offline
    Student
    Join Date
    Oct 2018
    Location
    South Africa
    Posts
    7
    You were right!! I tried another config program and managed to find my LCD specifically! The LCD is working now, thank you two for your help! Unfortunately I still have one more problem, the temperatures are still stuck. I'm thinking it is a problem with the hotend thermistor, as when I tighten it it changes from 111 degrees to -14. But what confuses me is that the bed temperature stays at around 108 degrees, which is strange because I never touched it. After replacing the nozzle the temps just jumped there and stayed there.
    Last edited by Bernard; 10-31-2018 at 03:58 AM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules