Subscribe to Our Newsletter Advertise
Close



Results 1 to 10 of 18

Threaded View

  1. 05-19-2014, 05:46 PM #5
    Kingoddball
    Kingoddball is offline
    Technologist Kingoddball's Avatar
    Join Date
    Oct 2013
    Location
    Syd - Aust
    Posts
    193
    Will do! Got all rods printed, might reprint again soon.

    This may fail - I'm printed in 100mm lengths and using acetone to glue/fuse them together. No breakage yet!
    (Only printing on an UP! Mini).

    My motors arrived yesterday, I will try get it connected and see if I can get axis movement, rods will handle it ok, but worried about buckling and bendind due to the motor weight on the Y/Extruder...

    I printed them with the layers going the length of the rods, I'm going to reprint vertically, seems like it will be stronger this way
    Last edited by Kingoddball; 05-19-2014 at 08:45 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules