Results 1 to 10 of 12
Thread: Can Eny Help me out a drawing
Hybrid View
-
09-26-2018, 08:22 AM #1
- Join Date
- Jun 2014
- Posts
- 887
I've attached the STL file generated from the cross-section image posted earlier. It's very very small, but you know that! If you print with 0.100 mm layers, it should be okay. At 0.200 layers, the curves and slopes will be bumpy.
Please let me know if it works for you.
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help