Close



Results 1 to 2 of 2
  1. #1

    Post Cura Profile ABS 0.3mm Prusa MK3

    Hi,
    We have attached a very good Cura profile for 3D printing in ABS using the Prusa MK3.
    The layer height is set a 0.3 mm. The profile is a good general starting point for any ABS part (whose resolution can be at 0.3 mm).
    A bit of tuning will be necessary depending on the part itself, but the main things are there.

    We hope it will help new ABS printers getting started.

    -The DustnPrint Team,
    Attached Files Attached Files

  2. #2
    Engineer-in-Training Roberts_Clif's Avatar
    Join Date
    Jun 2017
    Location
    Washington State, USA
    Posts
    381
    Add Roberts_Clif on Thingiverse
    I will download your setting to see where my fall in line.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •