Results 1 to 10 of 255
Hybrid View
-
02-02-2015, 11:17 AM #1
- Join Date
- Jan 2015
- Location
- Minnesota
- Posts
- 5
This is a wonderful read for me, I've looked at a number of printers, and I'm intrigued by the prusa I3v line, I'm pretty well set on a 10/12" model. At this point, I haven't ruled out more expensive printers, but like the idea of building it myself to get a feel for the printer, as well as its community base.
I've been considering adding a few components to the assembly out of the box so I can do it on first assembly rather than later, though indubitably I will have to do this in the future, anyway. I was considering the kysan motors as one such addition. Do you have any recommendations on parts to add to the initial build either due to increased quality, or difficulty in adding them at a later time?
I've already got an area set aside, and plan on making an enclosure and filament storage container for the printer.
-
02-02-2015, 11:51 AM #2
Glad these threads are helping. You might also want to have a look at this thread I started a few months ago:
http://3dprintboard.com/showthread.p...Show-your-MODSBambu P1S/AMS
NVision4D http://nvision4d.com
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials