MakerFarm 8" i3v Prusa build by Printbus

[printbus]

RobH2 - great to hear from you after so long. 4 or 5 downloads a month, huh? Yeah, I typically glance at my stuff on Thingiverse just about every day to see what the traffic has been. I used to get real excited when something hit a couple of hundred total downloads. That bubble recently burst, though. Whatever time I spend these days helping people with 3D printers seems to be with Ender 3 discussions. Looked at some Creality widget the other day that had something like 45,000 downloads.

Always wondered how many machines Colin sent out. Had to be a pretty small number compared to machines like that.

[1911ly]

Hello Printbus. Your thread was my first and only post up till this moment. I did get my sons I3v up and running flawlessly. It has given me very little trouble. I've read your thread form end to end several times. I ditched the stock end of limits switches and have added ABL. 2 years and very happy with it.

The only issue we really have had was just having one printer. We print a lot. About a month after the first printer I got the wild and crazy idea to build a homebrew. It evolved in to a fully enclosed printer 300x300x 400mm print size. It is the most used printer in the house. We usually print 3-4 rolls a month on that one. The boy uses his I3v a lot too.

I also picked up a 12in Pegasus that was someones failed build. I have that up and running too. It is a spare but we do use it from time to time. I should probably post up some pics and info on the 3 printers we have.

So, I have you to blame for the 3 I have now. lol. It is a fun hobby. I am doing things in CAD I never dreamed I could ever do. Zero regrets. Thanks for the inspiration! I will pull some pictures together and do a thread soon. I also have some designs on Thingiverse, same screen name. Thanks for the inspiration! And all the great tips and I deals I got from this thread!

Larry

PS I have been collecting the stuff to do a SLA as the next project.

[RobH2]

Larry, I'd like to welcome you to this forum. It's populated with some very, very gifted people. Do take advantage of them and you'll enjoy the journey.

[1911ly]

Larry, I'd like to welcome you to this forum. It's populated with some very, very gifted people. Do take advantage of them and you'll enjoy the journey.

Thanks Rob! Will do.

[printbus]

Z-AXIS LEAD SCREW UPGRADE

I was never thrilled with the 5mm threaded rods MakerFarm used for the Z-axis. They worked, but were so S-L-O-W. As a result of testing for an upper limit, I ran a z-axis feed rate of 2.5mm/Sec. A full 200mm of z-axis travel would mean 80 seconds of travel time.

From what I recall back in the i3v heyday, lead-screw upgrades always involved new Z-axis motor mounts that moved the motors farther from the frame. Since I overachieved and glued together all the fixed joints in the i3v wood frame during my initial assembly, swapping out the Z-axis motor mounts would not have been an easy thing to do. So, I just put up with the slow feed rate of the 5mm rods.

In a recent scan of i3v stuff on Thingiverse, I realized there were options for lead screw upgrades that retained the original motor mounts. With the right style of nut on the lead screws, new Z-axis nut plates is all that would be required. The i3v Lead Screw Nut Plate by cperiod even provided openSCAD source, so I went for it. I used 8mm diameter, 400mm long 4-start (8mm travel per turn) lead screws and brass nuts from ZYLTECH, along with their 5mm to 8mm shaft adapters. I debated whether single-start (2mm travel per turn) would be a safer bet than the 4-starts, but figured if 4-starts work on the latest Prusa MK3, they ought to work for me, especially knowing my Smoothieboard has a dedicated stepper driver for both Z-axis motors.



I haven't tested for a higher upper feedrate limit, but the i3v is currently configured and running fine with a Z-axis feed rate of 25mm/sec. That's quite swift compared to the original 5mm threaded rods. While the higher rate might help reduce time spent on layer shifts and lead to some marginal print quality improvement, the major benefit will likely just be in homing.

One brass nut in particular took a lot of shimming under one side for it to mount flush in the nut plate, and I had issues with the right-side screw being off-kilter from the vertical rail on that side when I mated the Z nut plate on that side to the x-idler plate. It appeared like the square hole on the x-axis idler plate for the Z-nut plate wasn't properly centered over the rail. Filing the hole wider and the tab on the nut plate narrower achieved the proper alignment. Until I can better understand what caused the misalignment, I'm holding off on posting the refinements I made to the Z nut plate to Thingiverse.