Results 1 to 10 of 19
Thread: Printing: Damn corners..
Hybrid View
-
11-05-2013, 12:10 PM #1
Did you solve this?
on my machine with preloaded firmware the accelleration was set to 500 mm/s which caused some ugly corners like yours, i set my
DEFAULT_MAX_ACCELERATION to {1500,1500,5,1500}
DEFAULT_ACCELERATION 1000
DEFAULT_RETRACT_ACCELERATION 1000
and
#define DEFAULT_XYJERK 20.0 // (mm/sec)
#define DEFAULT_ZJERK 0.4 // (mm/sec)
#define DEFAULT_EJERK 5.0 // (mm/sec)
this helped a lot, as the machine takes the corner at higher speed, i then get less ooze from the machine slowing down.
-
12-27-2013, 02:44 PM #2
Since i still got this problem with the corners i gonna try this now,
I normaly lowered my acceleration and jerk by half (in my case it was 1000, changed it to 500)
Since i had some skipping, this resolved it, i think.
Gonna try your solution now and see if the corners are any better, my print speed is in this case 50mm/s wich isnt that fast at all,
I still remember when i just had my printer my corners were alot better, aka before i changed acceleration, So ye it might be that!
Edit:
Meh still the same : https://www.dropbox.com/s/plsgjxpp9b...2022.33.19.jpg
No idea how to fix it after that..Last edited by DrLuigi; 12-27-2013 at 03:36 PM.
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials