Results 1 to 2 of 2
Thread: Missing layers?
-
06-26-2018, 03:40 PM #1
- Join Date
- Mar 2015
- Posts
- 1
Missing layers?
For the last few weeks I have been having issues with missing layers I think. All my print settings are the same as when my prints were coming out ok. It doesn't appear that the nozzle is having clogging issues and I cleaned and lubricated all my access rods. The printer is a craftbot plus and I have been using it for about 4 years now and this is the first time these issues have been happening. The picture below is from the start of a test print that I stopped part way through. It was printed with the default craftware PLA settings. Thank in advance for any help with resolving this.
https://imgur.com/Y9tWC4c
-
06-26-2018, 06:31 PM #2
- Join Date
- May 2018
- Posts
- 564
guesses could be inexpensive PLA changing thickness causing under extrusion or slipping filament drive.
Please explain to me how to...
Yesterday, 02:43 PM in 3D Printer Parts, Filament & Materials