Results 1 to 10 of 16
Thread: Best way of cleaning nozzles?
Threaded View
-
06-24-2018, 04:37 PM #8
- Join Date
- Oct 2016
- Posts
- 184
Did you heat the nozzle? If the nozzle is cold, the filament won't budge. How I do cold pull: with the nozzle at room temp, set the the nozzle to heat up, I usually just set PLA target temp. After the nozzle has heated up to ~80C, start pullin the filament out of the nozzle, it'll need some force to come out so make sure you have good grip. After the filament releases, it should have a uniform tip (like the inside of the nozzle). If not, the tip of the filament is still inside of the nozzle and cold pull failed.
Please explain to me how to...
Yesterday, 03:08 PM in 3D Printer Parts, Filament & Materials