Results 1 to 3 of 3
Threaded View
-
05-30-2018, 02:49 PM #3
- Join Date
- May 2018
- Posts
- 9
Ok just did trouble shooting.. psu is good, camera is good, all 4 motors as well as the carrieage motor is good.. however i need to find a main board and a carriage board to isolate this problem. this looks like a circuit failure with some of the power drivers to the main board but im not sure yet. even tried 2 new extruders.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials