Results 1 to 10 of 13
Thread: Anet A8 fan/extruder issue.
Threaded View
-
05-06-2018, 01:24 PM #2
- Join Date
- Apr 2018
- Posts
- 11
Update: The problem gets even stranger. I tried a print today with no fan and after about 3 layers I turned on a tiny desk fan on low near the printer. About 2 feet away. That air flow alone was enough to cause the print to fail. This doesn't make any sense considering until a week ago it printed fine with the fan on whatever Cura's default cooling setting is. 100% I believe.
Please explain to me how to...
Yesterday, 03:08 PM in 3D Printer Parts, Filament & Materials