Results 1 to 10 of 17
Threaded View
-
05-01-2018, 10:18 PM #10
- Join Date
- Mar 2018
- Posts
- 21
It's very well possible. You can dry filament out. Just put it in an oven for 2 hours at 120 Fahrenheit, not sure what Celsius is, but do the conversion and you'll be good.
@ Curious, I just put down blue tape and wiped it down with alcohol and the PETG seems to be sticking. I knew this, but figures glue stick or hair spray should work as well, but I guess not. I'm also using a raft because the first layer of the part I'm making has some fine detail so I need the first layers to be good.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials